- Home
- Mechanical Engineering Homework Help
- Thermofluid Homework Help
Thermofluid Homework Help - TutorBin
Submitting quality work on time does not get any easier than this. Choose TutorBin and avail top rated homework help today to maintain a high GPA.
Trusted by 1.1 M+ Happy Students
Thermofluid Homework Help For Achieving Academic Excellence!
The integrated study of heat transmission, fluid dynamics, thermodynamics, and combustion is known as thermofluid. You need to have a good conceptual understanding of the subject, computational abilities, and analytical skills to solve thermofluid homework independently. In addition, the variety of subjects you must study, the practical lectures, the projects, and the tight deadlines for homework make student life extremely difficult. Every student has a different way of learning, so the homework feels like an extra burden. Therefore, students typically ask for thermofluid homework help.
Do you ever ask, "Can someone do my thermofluid homework?" If so, we are happy to let you know that TutorBin is your one-stop shop for thermofluid homework solutions. Read the complete content to learn more about thermofluid homework assistance online.
TutorBin: No.1 Online Thermofluid Homework Help in the USA
| Topics | Benefits |
|---|---|
| Hydraulics and pneumatics | Top-notch quality by eminent tutors |
| Design of piping systems | 0% plagiarism |
| Pipe stress analysis | On-time delivery |
| HVAC design | 100% accuracy |
| Pump selection | Free revisions |
| Pressure testing | Pocket-friendly prices |
Topics Our Thermofluid Tutors Cover!
It’s time to dig into the topics our thermofluid tutors cover.
Introduction to hydraulics and pneumatics
In this, you learn how hydraulic and pneumatic systems work, how to identify circuit elements, and how to interpret designs for use in daily life.
Piping system design
It talks about a comprehensive approach to piping system design that offers helpful tools and direction on creating and running safe, effective systems.
Pipe stress analysis
You learn to reduce risk in piping systems by employing pipe stress software correctly.
Design of heating, ventilation, and air conditioning systems
Investigate the foundations of HVAC design, such as the primary system components, calculations, and design concerns.
Pumping basics
Learn the fundamental principles underlying pumps and how they operate.
Pumps selection
You discover the fundamental guidelines for choosing the optimal pump for a specific task.
Pump systems
In this, you become more knowledgeable about the interactions between successfully designed system parts and how to solve issues caused by bad design.
Pump testing
Here you learn how to undertake all aspects of pump performance testing and evaluate pumps in diverse sectors against global standards.
Fans and compressors
This topic describes the functions and qualities of fans and compressors.
Pressure testing
In this topic, you learn about pressure testing specifications, including the planning, execution, and record-keeping steps.
Perks You Enjoy With TutorBin When You Ask “Do My Thermofluid Homework”
When you ask us to "Do my thermofluid homework," you get the following added features:
TutorBin - The Best Thermofluid Homework Help Online!
By now, you know that TutorBin is the ultimate solution for all your academic needs. Students can get quick thermofluid homework help from TutorBin at any time, anywhere around the globe. TutorBin's online thermofluid homework assistance has the highest caliber and our tutor provides original solutions with no trace of plagiarism. Only qualified thermofluid tutors work with TutorBin. After thoroughly examining the requirements, our experts will write your thermofluid homework. At the same time, we ensure that each work has a step-wise solution and is well-explained.
The thermofluid online tutors at TutorBin are professionals who approach instruction by focusing on the learner's needs. To better understand students, we offer one-on-one support. Not just that, our service is cheap and of the highest quality. As a result, we have become the most trusted thermofluid homework solutions provider as a result.
Popular FAQs Searched By Students!
Can you do my thermofluid homework?
Yes, we deliver high-quality thermofluid homework solutions ready to submit. We take into account and fulfill all of your needs. Our thermofluid specialists can handle even the most challenging homework because they have years of experience in the field of academic support. You must complete the order form, paying close attention to even the most minor requirements for the homework.
How long will it take to write my thermofluid homework solutions?
Each client and each project are unique. As a result, each order's precise schedule needs a separate discussion. But we can guarantee prompt delivery. You can also rely on our online thermofluid homework help for last-minute homework.
Can an average student afford thermofluid homework help online?
Our thermofluid help online aims to assist students worldwide. We make an effort to keep our thermofluid homework services affordable for everyone because of this. Although the final cost of the homework will vary depending on the topic, length, level of difficulty, and deadline, you can be sure that it will always be affordable. We also provide promotions and reward points. Watch out for the best deals!
Are revisions included in the price?
We offer unlimited revisions as an added benefit to our thermofluid homework assistance. It suggests that we will tweak the homework until you are satisfied.
How can I seek thermofluid homework assistance from you?
Yes! You can follow these procedures to complete your "do my thermofluid homework" request:
Why is TutorBin the best online thermofluid question solver?
TutorBin offers an array of features that make it an excellent online thermofluid question solver.
Is asking for thermofluid help online considered cheating?
When you ask us, "Do my thermofluid homework," it is not cheating:
Who are thermofluid tutors?
At TutorBin, we only work with the best of the best. Prominent university grads with years of expertise in the thermofluid industry make up our team of professionals. Your thermofluid homework will always be in capable hands, thanks to it.
Can I get plagiarism-free thermofluid homework answers?
Every instructor for thermofluid creates homework from scratch without using any published material. Every piece we produce is distinctive, and we use quality control methods to ensure the document's ultimate quality.
Recently Asked Thermofluid Questions
Expert help when you need it- Q1: Module Code: MECH267001 SECTION A (50%) ● : Section A and Section B. 1. The final treatment of a novel polymer material requires holding the material above a temperature of 100°C for 5 minutes. This is achieved by suspending the polymer rod in a moving airstream that has a free air temperature of 150°C. The rod is held vertically, with the air stream moving horizontally. There are two sections The air velocity is 10m/s. The polymer rod has a diameter of 5cm and a length of 2m. Physical properties are shown in the table below. Material Air Air Property Density Specific heat capacity Polymer Thermal conductivity Polymer Specific heat capacity Polymer Density a) Sketch a suitable arrangement including a heating element. Value 1.16 kg/m³ 1006 J/kgK 11.0 W/mK 1200 J/kgK 1500 kg/m³ [3 marks] b) Using a value of the heat transfer coefficient of 80 W/m°K, and taking care to justify the approach you adopt, calculate the total time required to heat- treat the sample. i. ii. [6 marks] c) Further study of the novel polymer suggests that the polymer should remain below a temperature of 135°C to minimise reduction in the structural strength of the polymer. Demonstrate whether this criterion is met or not. [6 marks] d) One of the engineering team working with you on this project proposes a reduction in the heated free air temperature to 110°C to save energy. Assess this proposal in terms of: Page 2 of 15 The total cycle time for treatment of one rod The relative energy cost when compared to the original condition of using heated air at 150°C. Note that the air is heated from an ambient temperature of 20°C and assume all properties of the gas (except the free air temperature) remain constant. Consequently, provide an informed response to the engineer's suggestion. [10 marks] Ref: ME20214G74-2 Turn the page over Module Code: MECH267001 2. Biogas is produced through anaerobic digestion of waste food. It has a composition of 80% methane and 20% carbon dioxide (by volume). The biogas is burned stoichiometrically in air (of composition 21% oxygen and 79% nitrogen by volume) with the flame used to heat a tube containing flowing water. The biogas has an initial temperature of 25°C and the combustion gases exit from the burner at 102°C. a) Write a stoichiometric equation for the combustion of methane in air, and then adapt it for burning the biogas in air, assuming products are carbon dioxide, water, nitrogen only. [5 marks] b) Calculate the mass flowrate of air for the complete combustion of 1 kg/s of biogas. Molecular weights of appropriate elements and compounds can be found on page 9. [5 marks] c) From considering the combustion of the biogas, show that an energy transfer takes place of 35.5 kJ per kg of biogas that is burned. [5 marks] d) After heating, in the burner, the hot water passes through a shell and tube heat exchanger and is used to heat an oil flow. The water from the shell and tube heat exchanger passes directly back to the burner at 20°C. The flowrate of biogas into the combustor is 50 kg/s. Water enters the burner with a flow rate of 7kg/s at a temperature of 20˚C. Oil enters the shell and tube heat exchanger at a flow rate of 37.5 kg/s at a temperature of -5°C. i. ii. Sketch the arrangement Calculate the surface area of the heat exchanger, given an overall heat transfer coefficient of 750 W/m² K Take heat capacities as water 4.2 kJ/kgK oil 1.6 kJ/kgK Page 3 of 15 [10 marks] Ref: ME20214G74-2 Turn the page over Module Code: MECH267001 SECTION B (50%) Water with a density of 1000 kg/m³ and dynamic viscosity of 1.0 x 10-³ Pa.s flows under gravity from a reservoir through a galvanized iron pipe with an equivalent roughness of 0.15mm at a flow rate of 600 litres per minute into the local atmosphere. The flow path comprises a sharp edged entrance from the reservoir into the pipe (loss factor (K₁) of 0.5, based on average outlet velocity), a 4m horizontal length of the galvanized pipe of 80mm internal diameter, a fully open gate valve (KL = 0.15, based on average inlet velocity) and a 6m horizontal length of the galvanised pipe of 40mm internal diameter. There is no fitting or restriction at the outlet of the pipe into the local atmosphere and so no additional minor head loss. The liquid surface of the reservoir is exposed to the local atmosphere. a) 3. Sketch the system and calculate the mean velocity and the Reynolds number of the flow in the two different pipe sections and state whether the flow is laminar or turbulent in each. [6 marks] Determine the height of water in the reservoir required above the sharp edged entrance into the pipe to achieve the required flow rate. Note, the major and minor head losses can be summed in this flow path, like resistors in series, and the general equation for energy conservation in pipes compares the pressures at the inlet and outlet of the system only. [10 marks] c) The gate valve is replaced by a fully open globe valve (K₁ = 10, based on average inlet velocity). Determine the change in the height of water in the reservoir required above the sharp edged entrance into the pipe to achieve the required flow rate. b) d) Provide an explanation for the result obtained in part c). Page 4 of 15 [4 marks] [5 marks] Ref: ME20214G74-2 Turn the page over Module Code: MECH267001 4. A new design of telecommunications tower is modelled as a 5m diameter perfectly smooth sphere on top of a vertical perfectly smooth cylinder, 30m high and 2m diameter. It has to withstand an aerodynamic force imposed by a 100 km/h wind. For air take the density to be 1.20 kg/m³ and the kinematic viscosity to be 1.5 x 10-5 m²/s. a) b) c) d) Estimate at 100km/h the aerodynamic drag force acting on the sphere. [7 marks] Estimate at 100km/h the aerodynamic drag force acting on the cylinder. [7 marks] Estimate the bending moment at the base of the tower. [5 marks] Discuss why these results should only be regarded as an estimate of the influence of drag on the real tower. Page 5 of 15 [6 marks] Ref: ME20214G74-2 Turn the page over Module Code: MECH267001 Biot number, Bi = Nusselt number, Nux Prandtl number, Pr = Composite cylinders α where v is kinematic viscosity Stefan-Boltzmann constant, o= 56.7 x 10 kWm -12 n-² K-4 Newton's Law of Cooling Composite plain walls One dimensional heat transfer Fourier's Law Tt - To To - Too hv KA = = exp V Rex hx k Rex ReL Page 6 of 15 FORMULA SHEET Heat Transfer A - [ht] = exp Forced Convection over a flat plate ≤500 000 Nux > 500 000 Nux = 500 000 NUL Thermal diffusivity, a = Transient heat transfer: Lumped heat capacity system (Bi < 0.1) Stanton number, = = Grashof number, G₁ where t = is the time constant of the system. cpV hA Q = ġA = −kA Heat diffusion equation in cartesian coordinates k ə 1/2 (²017) = ( ² ( ² ) + 2, (^²7) (二)={ (x + ²₁ (^ ²) + ²/₂ (^²} + a₂ (KZT) k k ġg ду ду, дz дz. St = where v is kinematic viscosity No. of transfer units, NTU dT dx • (-/-) Q = -hA(T∞ - Tw) (Tb - Ta) {Σ (A) + Σ (4)} = 0.332 Pr0.333 Re0.5 0.0296 Pr0.333 Re0.8 0.037 Pr0.333 Re8 k pcp h pcpu gβ∆Td3 v² (Tb - Ta) (In(ro/ri)` {Σ (²n (7/²)) + Σ (1/²/A)} 2πlk = = UA Cmin Nu Re Pr Turn the page overSee Answer
- Q2: Module Code: MECH267001 SECTION A (50%) ● : Section A and Section B. 1. The final treatment of a novel polymer material requires holding the material above a temperature of 100°C for 5 minutes. This is achieved by suspending the polymer rod in a moving airstream that has a free air temperature of 150°C. The rod is held vertically, with the air stream moving horizontally. There are two sections The air velocity is 10m/s. The polymer rod has a diameter of 5cm and a length of 2m. Physical properties are shown in the table below. Material Air Air Property Density Specific heat capacity Polymer Thermal conductivity Polymer Specific heat capacity Polymer Density a) Sketch a suitable arrangement including a heating element. Value 1.16 kg/m³ 1006 J/kgK 11.0 W/mK 1200 J/kgK 1500 kg/m³ [3 marks] b) Using a value of the heat transfer coefficient of 80 W/m°K, and taking care to justify the approach you adopt, calculate the total time required to heat- treat the sample. i. ii. [6 marks] c) Further study of the novel polymer suggests that the polymer should remain below a temperature of 135°C to minimise reduction in the structural strength of the polymer. Demonstrate whether this criterion is met or not. [6 marks] d) One of the engineering team working with you on this project proposes a reduction in the heated free air temperature to 110°C to save energy. Assess this proposal in terms of: Page 2 of 15 The total cycle time for treatment of one rod The relative energy cost when compared to the original condition of using heated air at 150°C. Note that the air is heated from an ambient temperature of 20°C and assume all properties of the gas (except the free air temperature) remain constant. Consequently, provide an informed response to the engineer's suggestion. [10 marks] Ref: ME20214G74-2 Turn the page over Module Code: MECH267001 2. Biogas is produced through anaerobic digestion of waste food. It has a composition of 80% methane and 20% carbon dioxide (by volume). The biogas is burned stoichiometrically in air (of composition 21% oxygen and 79% nitrogen by volume) with the flame used to heat a tube containing flowing water. The biogas has an initial temperature of 25°C and the combustion gases exit from the burner at 102°C. a) Write a stoichiometric equation for the combustion of methane in air, and then adapt it for burning the biogas in air, assuming products are carbon dioxide, water, nitrogen only. [5 marks] b) Calculate the mass flowrate of air for the complete combustion of 1 kg/s of biogas. Molecular weights of appropriate elements and compounds can be found on page 9. [5 marks] c) From considering the combustion of the biogas, show that an energy transfer takes place of 35.5 kJ per kg of biogas that is burned. [5 marks] d) After heating, in the burner, the hot water passes through a shell and tube heat exchanger and is used to heat an oil flow. The water from the shell and tube heat exchanger passes directly back to the burner at 20°C. The flowrate of biogas into the combustor is 50 kg/s. Water enters the burner with a flow rate of 7kg/s at a temperature of 20˚C. Oil enters the shell and tube heat exchanger at a flow rate of 37.5 kg/s at a temperature of -5°C. i. ii. Sketch the arrangement Calculate the surface area of the heat exchanger, given an overall heat transfer coefficient of 750 W/m² K Take heat capacities as water 4.2 kJ/kgK oil 1.6 kJ/kgK Page 3 of 15 [10 marks] Ref: ME20214G74-2 Turn the page over Module Code: MECH267001 SECTION B (50%) Water with a density of 1000 kg/m³ and dynamic viscosity of 1.0 x 10-³ Pa.s flows under gravity from a reservoir through a galvanized iron pipe with an equivalent roughness of 0.15mm at a flow rate of 600 litres per minute into the local atmosphere. The flow path comprises a sharp edged entrance from the reservoir into the pipe (loss factor (K₁) of 0.5, based on average outlet velocity), a 4m horizontal length of the galvanized pipe of 80mm internal diameter, a fully open gate valve (KL = 0.15, based on average inlet velocity) and a 6m horizontal length of the galvanised pipe of 40mm internal diameter. There is no fitting or restriction at the outlet of the pipe into the local atmosphere and so no additional minor head loss. The liquid surface of the reservoir is exposed to the local atmosphere. a) 3. Sketch the system and calculate the mean velocity and the Reynolds number of the flow in the two different pipe sections and state whether the flow is laminar or turbulent in each. [6 marks] Determine the height of water in the reservoir required above the sharp edged entrance into the pipe to achieve the required flow rate. Note, the major and minor head losses can be summed in this flow path, like resistors in series, and the general equation for energy conservation in pipes compares the pressures at the inlet and outlet of the system only. [10 marks] c) The gate valve is replaced by a fully open globe valve (K₁ = 10, based on average inlet velocity). Determine the change in the height of water in the reservoir required above the sharp edged entrance into the pipe to achieve the required flow rate. b) d) Provide an explanation for the result obtained in part c). Page 4 of 15 [4 marks] [5 marks] Ref: ME20214G74-2 Turn the page over Module Code: MECH267001 4. A new design of telecommunications tower is modelled as a 5m diameter perfectly smooth sphere on top of a vertical perfectly smooth cylinder, 30m high and 2m diameter. It has to withstand an aerodynamic force imposed by a 100 km/h wind. For air take the density to be 1.20 kg/m³ and the kinematic viscosity to be 1.5 x 10-5 m²/s. a) b) c) d) Estimate at 100km/h the aerodynamic drag force acting on the sphere. [7 marks] Estimate at 100km/h the aerodynamic drag force acting on the cylinder. [7 marks] Estimate the bending moment at the base of the tower. [5 marks] Discuss why these results should only be regarded as an estimate of the influence of drag on the real tower. Page 5 of 15 [6 marks] Ref: ME20214G74-2 Turn the page over Module Code: MECH267001 Biot number, Bi = Nusselt number, Nux Prandtl number, Pr = Composite cylinders α where v is kinematic viscosity Stefan-Boltzmann constant, o= 56.7 x 10 kWm -12 n-² K-4 Newton's Law of Cooling Composite plain walls One dimensional heat transfer Fourier's Law Tt - To To - Too hv KA = = exp V Rex hx k Rex ReL Page 6 of 15 FORMULA SHEET Heat Transfer A - [ht] = exp Forced Convection over a flat plate ≤500 000 Nux > 500 000 Nux = 500 000 NUL Thermal diffusivity, a = Transient heat transfer: Lumped heat capacity system (Bi < 0.1) Stanton number, = = Grashof number, G₁ where t = is the time constant of the system. cpV hA Q = ġA = −kA Heat diffusion equation in cartesian coordinates k ə 1/2 (²017) = ( ² ( ² ) + 2, (^²7) (二)={ (x + ²₁ (^ ²) + ²/₂ (^²} + a₂ (KZT) k k ġg ду ду, дz дz. St = where v is kinematic viscosity No. of transfer units, NTU dT dx • (-/-) Q = -hA(T∞ - Tw) (Tb - Ta) {Σ (A) + Σ (4)} = 0.332 Pr0.333 Re0.5 0.0296 Pr0.333 Re0.8 0.037 Pr0.333 Re8 k pcp h pcpu gβ∆Td3 v² (Tb - Ta) (In(ro/ri)` {Σ (²n (7/²)) + Σ (1/²/A)} 2πlk = = UA Cmin Nu Re Pr Turn the page overSee Answer
- Q3:Q2 (20 pts): A smooth transition section connects two rectangular flat channels. The upstream channel has a width of 5.0 ft and a water depth of 2 ft. If the flow rate in the channel is 30 cfs: a) Determine the minimum width the channel can have in section 2 so that conditions upstream remain unchanged. Neglect head losses. b) If the channel width in the downstream conditions is 2 ft, show the change in upstream conditions graphically. Neglect head losses.See Answer
- Q4:PROBLEM 1 Problem 6.5. Water at room temperature flows through a 5 cm-diameter smooth tube at Re, = 20,000. a) Calculate C,,U, and R. b) Using van Driest's expression for mixing length, calculate the eddy diffusivity E at y = 10 and y = R/3, where y is the distance from the wall.See Answer
- Q5:PROBLEM 2 Problem 6.14. Microbubbles that are generated on heated surfaces during subcooled boiling can roll on the heated surface before departing from the surface. A heated metallic flat plate has a surface temperature of 380 K. Atmospheric water at a far field temperature of 367 K and velocity of 7 m/s flows parallel to the surface. Consider a microbubble rolling on the surface at a distance of 25 cm from the leading edge of the surface. What is the maximum diameter of the microbubble in order for it to be completely surrounded by superheated water? For this microbubble what is the time-average velocity of the surrounding liquid at around the center and top of the microbubble?See Answer
- Q6:PROBLEM 3 Problem 7.9. The fuel rods in an experimental nuclear reactor are arranged in a rectangular pattern, as shown in the Fig. P7.9. The fuel rod diameter is 1.14 cm, and the pitch is Pitch=1.65 cm. The rod bundle is 3.66 m tall. Assume that the core operates at 6.9 MPa, and the water temperature at inlet is 544 K. Heat flux on the fuel rod surface is uniform and equal to 6.31×10¹ W/m². The flow is assumed to be 1-D, and the mass flow rate through a unit cell is 0.15 kg/s. Estimate the fuel rod surface temperature at x = 10 cm, x= 25 cm, and x = 50 cm locations. Flow -|| - Channel Fuel Rods PitchSee Answer
- Q7:PROBLEM 4 Problem 7.21. Atmospheric water at 300 K flows through a 0.5 cm inner diameter tube that is 12 cm long. The velocity at inlet can be assumed to be uniform, and equal to 2.5 m/s. The surface temperature is 350 K. a) Find the heat transfer coefficient at the exit. b) Suppose that the mean surface roughness was 46 um. Estimate the heat transfer coefficient at the exit. c) For part a, calculate the time-average water temperature at exit on the centerline of the tube. Hint: The Fanning friction factor C, can be found from the correlation of Churchill (1977a) for the transition flow regime.See Answer
- Q8:PROBLEM S Problem 7.27. Liquefied petroleum gas (LPG) (assumed to be pure propane, for simplicity) in a partially insulated horizontal tube at a pressure of 7 bars. The tube diameter is 4 cm. The mixture mass flux is 197 kg/m³.s. Assume fully- developed flow, and thermally-developed conditions. At a location where the propane bulk temperature is equal to 120 K, the wall surface temperature is equal to 135 K. a) Find the frictional pressure gradient and convection heat transfer coefficient, using appropriate correlations of your own choice. Assume that the tube is hydraulically smooth. b) Repeat the calculations in Part a, this time assuming that the tube is coiled into a vertically-oriented helical configuration with R=25 cm and 1=10 cm. In part a, repeat the calculations this time assuming that the surface has a characteristic roughness of 50 μm.See Answer
- Q9:Problem 1: Thermodynamic Derivations Expand the following terms into expressions with variables that can be measured experimentally such as pressure, temperature, volume, Cv, and Cp. Two of the below expressions will result with S in the final expression: A) (@A/OS)P B) (@A/OS)T C) (@G/OP)sSee Answer
- Q10:Problem 2: Pump calculations A liquid has a molar volume of 0.2 L/mol at 400 K and 4 bar. This liquid is compressed with a pump that operates at steady-state and adiabatically. The liquid enters the pump at a rate of 3 mol/s, at a temperature of 400 K and pressure of 4 bar and exits at a pressure of 20 bar. The liquid has the following properties which can be used (if needed) in the solution: Coefficient of thermal expansion, ay = 2 x 10³ K-¹ • Isothermal compressibility factor, K7= 4 x 10¹5 bar¹ Cp = C₁ = 30 J/mol-K Find the following: A) Work done by the pump B) Temperature of the liquid leaving the pump C) Molar volume of the liquid leaving the pumpSee Answer
- Q11:Problem 3: Tank Pressure Safety Your supervisor asks you to employ an old tank with a volume of 60 L, but he has concerns regarding its mechanical resistance to pressure for use in a modified process. The tank was originally rated for a maximum pressure of 36 bar (absolute). It has been established that for a safe operation (no risk of bursting), you are never to exceed half the maximum pressure specification of the tank. The plan is to use this tank to store a maximum of 1000 g of ethane at a maximum temperature of 450 K. Check whether you will be able to use this tank safely (no bursting) or not by performing calculations with the following methods: A) Ideal gas law B) Lee-Kesler charts C) Virial equationSee Answer
- Q12:Question 1 Sheets of steel are typically made by rolling heated steel at high temperatures, resulting in a flat plate as shown in figure 1. The resulting hot flat plates are cooled by passing air at a fixed temperature of 295 K over the plate. The plate is 4 m long, and 1.2 m wide, and has a uniform temperature of 600 K. The velocity of the flow of air is 9.5 m/s. Air 4 m Figure 1: Flow of air over a flat plate. Assuming the sheets are oriented such that the air flow along the length of the plate (i.e., along the a direction, as denoted by the blue arrow), calculate: a) The local heat transfer coefficient at a distance 1 m from the leading edge of the plate (i.e. at z = 1 m) [4 marks] b) The average heat transfer coefficient over the entire plate [3 marks] c) The rate of heat transfer from the plate to the air. [1 mark] If the plate is re-oriented such that the flow of air now flows along the width of the plate (i.e. along the y direction, as denoted by the red arrow), calculate the rate of heat transfer from the plate to the air. [4 marks] In all cases above, you may neglect any heat transfer from the bottom of the plate.See Answer
- Q13:Question 2 You are to design a finned heat sink for a computer mother board, which comprises of vertically mounted rectangular parallel plates on a porous base, as shown in figure 2. The height of each fin is 40 mm, and the temperature of the fins are constant at 80 °C. The heat from the fins induces an air flow (due to free convection) from the surroundings through the porous base and through the parallel plates, where they exit at the top. The surrounding temperature is constant at 80 °C. The base is square, with a width of 50 mm. Neglect heat transfer Air flow (via free convection) Fins Neglect heat transfer 50 mm Porous base Neglect heat transfer Figure 2: Free convection in between parallel plates. 40 mm Neglecting the heat transfer from the bottom of the base, and through the extreme left and right side of the fins, i.e., the only heat transfer is due to the convection in between the parallel plates (as shown in figure 2), calculate the minimum number of fins (plates) required if the required heat transfer rate is 18 W. [10 marks] You may assume that the thickness of the fins is negligible.See Answer
- Q14:Question 3 A large horizontal brass plate is used to boil water at atmospheric pressure. What is the maximum permitted temperature of the plate so that it does not exceed the critical heat flux? [8 marks]See Answer
- Q15:The chocolate peanut factory One worldwide-recognised brand in the field of agroindustry manufactures the industrial chocolate peanut snack W&W's in three steps. Initially, the peanuts are sieved in order to remove broken grains (B); then, the unbroken peanuts (P) are driven to the next unit where are first roasted and then covered with chocolate (C). Following, the third step consists of a crusting operation, where each piece is covered with a layer of a sugar (S) - water (W) mixture and then is dried. The scheme below shows the process. Qkg/h 0.590 kg P/kg 0.410 kg B/kg Sieving Qkg Bih Qkg P/h Qkg C/h Roasting & Coating Qkg/h w.kg C/kg w kg P/kg Qkg/h w.kg Cikg wkg P/kg Qkg/h 0.660 kg S/kg 0.340 kg W/kg Crusting Qkg W/h Qkg/h 0.290 kg C/kg 0.430 kg P/kg 0.280 kg S/kg The stream Qe is made of low quality pieces that cannot be commercialised so it keeps the same composition as the product sent to crusting unit. In average, there are 10 kg of satisfactorily coated peanuts per each kg of rejected peanuts. If the production of commercial W&W's is stated to be 1000.0 kg/h, find the mass flowrate and compositions of the rest of streams, this is, all feeds (Q₁, Q4 and Q₂) and exits (Q3, Q6, Qs and Q9). Assume that the process operates in steady state.See Answer
- Q16:EML 4706 - Two water tanks, A and B, are 1.5km apart and you have been tasked with connecting the two reservoirs together so you can transfer water from one reservoir to another. The two reservoirs are open to atmosphere and the surface of the two reservoirs is at the same level. Your goal is to achieve a volumetric flow rate of at least 1 m³/s using a pump that outputs 20kW of power. Select a pipe material and size that would be appropriate for this application. You might have to research how to include power in a conservation of energy equation (covered in previous courses). Make any assumptions you feel are necessary. You do not need to consider minor losses if you choose not to. 1 PUMP BSee Answer
- Q17:#Question 2 (20%) Construct the Cp vs. T graphs for hydrogen and ammonia, then compare the quantities of heat obtained in an isobaric process that operates between 300 and 600 K. Which gas has a larger quantity of heat? Comment on the difference. The Excel data template for H₂ is provided in "Q2-Cp_vs_T".See Answer
- Q18:# Question 3 (20%) Compare the quantities of work obtained in a reversible isothermal (373 K) vs. isobaric (5 atm) process upon compression of O2 and CO2 from 1.0 to 0.1 L/mol. (-7.0 vs. 2.8 kJ/mol for O2 and 5.5 vs. 2.6 kJ/mol for CO2? Why more work with O2 than with CO2?See Answer
- Q19:# Question 4 (30%) The reproduction of Figure 2D.10 for Nitrogen and Methane using both the NIST database and the VDW EOS is given in the PDF file "Q4_Figure2D-Graph". Comment on the degree of (dis?)agreement between the NIST and VDW EOS; and answer related questions on the each graph.See Answer
- Q20:8) If the pressure, Px, is 75 kPa, find the pressure, Py, in the adjoining water pipe.See Answer
Popular Subjects for Thermofluid
You can get the best rated step-by-step problem explanations from 65000+ expert tutors by ordering TutorBin Thermofluid homework help.Get Instant Thermofluid Mechanical Solutions From TutorBin App Now!
Get personalized homework help in your pocket! Enjoy your $20 reward upon registration!
"After using their service, I decided to return back to them whenever I need their assistance. They will never disappoint you and craft the perfect homework for you after carrying out extensive research. It will surely amp up your performance and you will soon outperform your peers."
"Ever since I started using this service, my life became easy. Now I have plenty of time to immerse myself in more important tasks viz., preparing for exams. TutorBin went above and beyond my expectations. They provide excellent quality tasks within deadlines. My grades improved exponentially after seeking their assistance."
"They are amazing. I sought their help with my art assignment and the answers they provided were unique and devoid of plagiarism. They really helped me get into the good books of my professor. I would highly recommend their service."
"The service they provide is great. Their answers are unique and expert professionals with a minimum of 5 years of experience work on the assignments. Expect the answers to be of the highest quality and get ready to see your grades soar."
"They provide excellent assistance. What I loved the most about them is their homework help. They are available around the clock and work until you derive complete satisfaction. If you decide to use their service, expect a positive disconfirmation of expectations."
TutorBin helping students around the globe
TutorBin believes that distance should never be a barrier to learning. Over 500000+ orders and 100000+ happy customers explain TutorBin has become the name that keeps learning fun in the UK, USA, Canada, Australia, Singapore, and UAE.
